✂ Tile Cutting Calculator PRO
Estimate tiles, cuts, waste, blade life, and total cost for any tile installation project.
Dimension Diagram — updates as you type
Tile grid with a cut piece. Pattern and cut type set the waste factor on top of net area.
1 Tile Specifications
2 Cut Type & Pattern
Straight: 10% | Diagonal: 15% | Herringbone: 20%
Results
Tile Quantities
Cut Analysis
Blade Life
Cost Breakdown
⚠️ Pre-Export Checklist
- Room dimensions verified on-site
- Tile pattern and layout confirmed with client
- Tile lot numbers match (same dye lot)
- Underlayment / backer board requirements confirmed
- Threshold and transition details specified
- Grout and adhesive quantities estimated
- Tile cutter and blade verified for material type
Professional Tile Cutting Guide
📐 Formulas & Wastage Lookup ▼
Tile Calculation
Tiles = Area ÷ TileArea × (1 + WasteFactor/100)
Always round up to whole tiles. Purchase 5-10% extra for future repairs.
Pattern Wastage Guide
| Pattern | Waste | Notes |
|---|---|---|
| Straight | 10% | Minimal waste, easiest layout |
| 45° Diagonal | 15% | Corner triangles create waste |
| Herringbone | 20% | Complex cuts at borders |
| Basket Weave | 12% | Moderate waste at edges |
| Running Bond | 10% | Offset pattern, moderate waste |
Blade Life
Diamond: 200-400 sqft (ceramic/porcelain)
Ceramic: 100-200 sqft (ceramic only)
Dry Cut: 50-100 sqft (quick jobs)
Wet Cut: 300-600 sqft (with water cooling)
💡 Pro Tips ▼
- Buy all tiles from the same dye lot — color varies between production runs.
- Dry lay tiles first to plan cuts and minimize waste before cutting.
- Use a wet saw for clean cuts on porcelain and natural stone.
- Mark cut lines with grease pencil, not marker — it wipes off easily.
- Keep 2-3 spare tiles for future repairs — matching later is nearly impossible.
- Account for grout lines — 1/16" to 1/4" spacing affects total tile count.
Tile Cutting — 3D Preview
Drag to rotate — Scroll to zoom
İlgili Hesaplayıcılar
Frequently used together on the same project.
Client & Quote (prints on PDF & Excel)
Adjustments (applies to exports)
Contingency is added as a separate line on the exported cost summary. Waste % is printed as an advisory reminder.
Project notes (prints on PDF & Excel)
Result compare (A/B)
| Item | Pinned | Current | Change |
|---|---|---|---|
Saved rates auto-apply from your Price Library. Advanced details stay in your browser — nothing is uploaded except inside your own PDF/Excel exports.
📖 Hesaplayıcı Nasıl Kullanılır
Toplam alanı ölçün.
Fayans boyutlarını girin.
Desen türünü seçin.
Fire faktörünü girin.
Hesapla'yı tıklayın.
Detayları inceleyin.
📐 Kesim Formülleri
⚠️ Yaygın Hatalar
Fireyi küçümsemek.
Desen yönünü göz ardı etmek.
Yanlış eklem genişliği kullanmak.
Kalınlığı göz ardı etmek.
Engeller çevresindeki kesimleri hesaba katmamak.
💡 Profesyonel İpuçları
Her zaman %10-15 fazla sipariş edin.
Odak ortasından planlayın.
Kaliteli ıslak testere kullanın.
Kesim çizgilerini belirgin işaretleyin.
Aynı partiden yedek saklayın.
Kurulumdan önce pratik yapın.
Hesaplarken eklem genişliğini hesaba katın.
❓ Sıkça Sorulan Sorular
Düz desenler için %10-15 fazla. Diyagoneller için %15-20 fazla. Karmaşık desenler için %20-25 fazla.
Toplam alanı ölçün ve fayans alanına bölün. Fireyi ekleyin.
Boyut ve eklem genişliğine bağlıdır. 300mm fayans için m² başına yaklaşık 0,5-0,8 kg.
Seramikte düz kesimler manuel kesici ile yapılabilir. Porselen ve taş ıslak testere gerektirir.
Seramik için standart tutkal. Porselen için polimer modifiyeli tutkal.
🏗️ Gerçek Dünya Projeleri
Fayans hesaplayıcımızı kullanarak fayans miktarını, fireyi, harç ve kesim maliyetlerini tahmin edin.
✅Method, Sources & Review
Maintained by theBuildingCalc methods desk· Last reviewedSeptember 23, 2026. This calculator implements the standards and references below; every figure can be rechecked against the formulas and worked example on this page.
Results are estimates, not engineering advice. Verify against local codes and licensed professionals for structural, electrical, and gas work. See ourTerms. Spotted an error? Report it— corrections ship with the next review.